Login

Username:


Password:


Remember me



Forgot Password?




 Merchandise





1 out of 52 out of 53 out of 54 out of 55 out of 5

MK1 Rhino Chasis Conversion Tutorial 9th July

Permanent Linkby Cain Tiberius on Sun Jul 10, 2011 12:46 am

Hey folks.

A couple months ago I posted pics of my MK1 Rhino/Razorback conversion, and had calls to show how I made it. Well I suck at WiP or tutorials. But I am working on another and have taken alot more pics.

If you have any questions, feel free to ask.

First of all I have to say the way I made the Grills is different from the first time. But I was able to get them made in 1/4 of the time.

I noticed that the interior of the rear hatch to the Rhino kit has a nice Grill patern. So I used Greenstuff to make 4 positive molds of the patern. Its inportnant to try an keep the green stuff about 1mm thick. (Thicker will mean more work on the next stage as I found out)

Image

Then I cut 4 pieces of plasticard to the shape of the grills including the surounding colars. (I first did it with paper till I got the desired size.) Then I did the same with the Green Stuff moldings making them so you can see about 4mm of the Plasticard all around the edges.

Image

Next I mixed up some miliput, altho I would imagin what ever medium you prefer will do. and I rolled it out to about 3 mm think. (Again thicker will add more work after.) I then pressed the moldings I made into the soft Miliput making sure to press it evenly so it comes out flat.
Also while it is still soft, I used the plasticard template to cut away the excess miliput so that I would have the right shape once it had set.

Image

I carefully removed the molds I made while the miliput was still soft. If you are wondering. I used Sunflour Oil as a release agent so the molds wouldn't stick to the miliput. I find it works great and it cleans of easily.

Image

Once they had set I use a file and sandpaper to make sure the pieces were the right size, shape and all the edges were nice and sharp. I dry placed them on the side of the tank to make sure they would look ok.

Image

Using a mini hacksaw blade I cut off the existing exausts and used a hobby knife to trim off all the raised detail. I then cut the side pieces out of plasticard and glued them on so the sides are smooth. I also smoothed out the armour levels at the front and back of the drive sections again using plasticard.

Image

Next I cut out the front plate. The main piece was 43mm by 30mm usuing 2mm plasticard. The Doors are 14mm x 25mm and the view holes are 5mm x 10mm with a 3mm x 8 mm cutout. Both the doors and the view slits a 0.5mm plasticard. I also cut a small circle of plasticard about the size of a 5 pence piece to place into left copolar hole as it is slightly deeper.

Image
Image
Image

The Side doors are 30mm circles made from 2mm Plasticard with a verticle line scored on them from top to bottom. The Hinges are 20mm of 1/16 tube. The Brackets are 15mm x 5mm x 0.5mm plasticard. It is easier to stick the brackets to the tube before sticking the assembly to the door.

Image
Image

For the exausts I first got some 3mm plastic tubing, heated it up with a hair drier and made 4 x 90 degree bends. Don't make them too long, but also give yourself some rome for adjustment later.

Image
Image
Image

Next cut 4 pieces of 6mm plastic tubing at 35mm and 4 pieces of 7mm plastic tubing at 30mm. I drilled holes into the 7mm x 30mm to look like the old style exausts. (but only on the visible sides) Believe me, it is a pain in the butt to do. But it looks much better for it.
Next I glued the 7mm tubes over the 6mm tubes, with 1mm showing at the bottom and 4mm showing at the top. Then I took the 3mm tubes with the bends and I glued them to the inside front edge of the 6mm tubes.

Image
Image

After sticking the Vent Grills, side doors and the exausts to the side of the tank, I cut 2 pieces of 1/16 aluminium tubing approximatly 80mm long for the hold rails. I say approximately because it can vary. You need it to fit around the exausts. I don't glue the hand rails until after I have painted the model or they will get in the way.
I also made 2 foot boards by cutting 2 pieces of 2mm plasticard 65mm x 14mm clipping the ends at a slight angle (yeah I go by rule of eye alot.) These are glued under the sides of the tank.

Image

For the MK1 style 'storm' bolter(s) I got the regular hatches and trimed them like the picutes show.

Image
Image

They are then glued into place and modeling putty is used to fill in the gaps to make them smooth.

Image

I think that covers everything. The Razorback options are simply the turret from the Stormraven kit.

Here are a couple more weapon options I am working on.

Image
Image

Comments, Critisms and Questions are all welcome.

Nathanael

My BA Blog

Semper Fidelis
7 Comments Viewed 81054 times
Comments

Re: MK1 Rhino Chasis Conversion Tutorial 9th July

Permanent Linkby killmaimburn on Sun Jul 10, 2011 7:45 am

Dammit man, quit being so awesome. :)
Last edited by killmaimburn on Sun Jul 10, 2011 7:45 am, edited 1 time in total.
Barely even lurking..
ruffian4 wrote:Handy fellow, this kmb...Like Ahriman delving the paths of the webway ...
World of ME First try at Apoc Batrep WHAT/WHO is AOS?
User avatar
killmaimburn
Now Vanus Clade
 
Posts: 6581
Joined: Fri Sep 21, 2007 12:00 am
Location: Nottingham, mid-land
Blog: View Blog (1)

Re: MK1 Rhino Chasis Conversion Tutorial 9th July

Permanent Linkby Confused_gordy on Mon Jul 11, 2011 8:42 pm

Awesome sauce!

Im glad you are so good at this stuff, it makes me jealous enough to keep painting
User avatar
Confused_gordy
Newbie
 
Posts: 101
Joined: Mon Nov 30, 2009 8:21 am
Blog: View Blog (0)

Re: MK1 Rhino Chasis Conversion Tutorial 9th July

Permanent Linkby Cain Tiberius on Tue Jul 12, 2011 11:44 am

Lol, thanks guys. I'm not awesome, but obviosly have a nak for this kinda thing. And I am happy to share with y'all and I am glad it inspires you to carry on.
My BA Blog

Semper Fidelis
User avatar
Cain Tiberius
Newbie
 
Posts: 637
Joined: Mon Mar 14, 2011 9:36 pm
Blog: View Blog (36)

RE: MK1 Rhino Chasis Conversion Tutorial 9th July

Permanent Linkby Cain Tiberius on Wed Jul 13, 2011 4:06 pm

Hey folks. Just a couple pics to add on the subject.

Here is my MK1 conversion Predator. All the weapons are magnetised so I have all the options.

Image

I've also made a regular predator model of the Mk2 variant. Again with all the weapon options. (The actual turret weapons are shared between both Predators until i can get hold of some more.)

Image

Nathanael
My BA Blog

Semper Fidelis
User avatar
Cain Tiberius
Newbie
 
Posts: 637
Joined: Mon Mar 14, 2011 9:36 pm
Blog: View Blog (36)

Re: MK1 Rhino Chasis Conversion Tutorial 9th July

Permanent Linkby Spack on Wed Jul 13, 2011 11:03 pm

I'd highly recommend getting some Oynamaru, it's great for creating moulds and nothing seems to stick to it, so you don't even need a release agent. You could make moulds of your final pieces and then cast as many as you need all the same size, and when you don't need the moulds any more simply dump in very hot water and then mould something else.
User avatar
Spack
I R Ginger
Field Marshall
 
Posts: 6757
Joined: Sat Feb 12, 2005 12:00 am
Location: Birmingham, UK
About Me: I've been interested in Warhammer 40k since 1988 when I bought my first Space Marines. Over the years have also owned and played Space Hulk, Adeptus Titanicus, Space Marine/Epic 40k, Blood Bowl, WHFRP (1st ed), Judge Dredd, Aeronautica Imperialis, and a few other TT/RP games.

Currently working as a software developer in the automotive industry using VB, C/C++, ASP, PHP, HTML/CSS, JQuery/Javascript, SQL, and as an admin managing networks running Windows 2008/2012/2016 and SQL Server 2008/2012/2014/2017.

Develop on personal sites with PHP, including modding phpBB3, Gallery2, and admin MySQL, Linux, CVS, and more.

[b]Personal/hobby websites[/b]
These are websites that I curently run.
[url=http://www.ageofstrife.com]Age of Strife[/url]
[url=http://www.ab40k.org]AB40k.org[/url]
Blog: View Blog (29)

Re: MK1 Rhino Chasis Conversion Tutorial 9th July

Permanent Linkby Cain Tiberius on Thu Jul 14, 2011 12:54 am

Hmm. I haven't heard of that stuff. I'll have to google it. But I only plan on doing one more Mk1 chasis. So it wouldn't do me any good now unless I make more to put on ebay.
Thanks anyway bud :)
My BA Blog

Semper Fidelis
User avatar
Cain Tiberius
Newbie
 
Posts: 637
Joined: Mon Mar 14, 2011 9:36 pm
Blog: View Blog (36)

Re: MK1 Rhino Chasis Conversion Tutorial 9th July

Permanent Linkby Ljundhammer on Thu Jul 14, 2011 5:21 pm

Excellent stuff.

I've gone a nostalgic!
When in deadly danger
When beset by doubt
Run in little circles
Wave your arms and shout
- parody of the litany of command
User avatar
Ljundhammer
Newbie
 
Posts: 1563
Joined: Mon Oct 01, 2007 12:00 am
Location: Nottingham - the North
Blog: View Blog (0)
User avatar
Cain Tiberius
Newbie
 
Posts: 637
Joined: Mon Mar 14, 2011 9:36 pm
Blog: View Blog (36)
Archives
- August 2013
Eldar 12/08/13 Farseer and Ranger Squad.
   Tue Aug 13, 2013 11:31 pm
Malifaux: Oiran for Ten Thunders.
   Sun Aug 04, 2013 3:02 pm

+ July 2013
+ May 2013
+ April 2013
+ March 2013
+ February 2013
+ January 2013
+ December 2012
+ November 2012
+ September 2012
+ August 2012
+ March 2012
+ February 2012
+ November 2011
+ September 2011
+ August 2011
+ July 2011
+ May 2011
+ March 2011
Search Blogs