Login

Username:


Password:


Remember me



Forgot Password?




 Merchandise





Diary of a Madman


My infrequent dips into the 40k hobby, and other modelling. Expect photos of half built kits and little to no painting. :?
 
Feed
Next

Predator P1 Bio 1/4 scale 3D modelling continued

Permanent Linkby Spack on Thu Mar 26, 2015 9:01 pm

Initial modelling details can be found in blog/Spack/predator_bio_mask_14_scale_modelling_b-176.html

I finally got around to working on the 3D model again, and have reached a point where I'm happy with the details and have prepared the model for printing. As well as finishing the interior venting details, the hose connector on the left temple was replaced with something closer to that used on the NECA Big Red figure (the Big Red bio is almost identical to the original P1 helmet, the only differences being the two half spheres on the forehead and the colour), and a small hose connector detail was added to the left cheek (this detail is missing from the NECA bios).

pdo mask with shell smoothed face vent clean lasers temple pipe.png


pdo mask with...


[ Continued ]
Attachments
IMG_20150327_162001583.jpg
IMG_20150327_161934410.jpg
Inner bio details
pdo mask with shell smoothed face vent clean lasers temple pipe inside.png
Outer view of bio

Tags: PredatorBio Mask3D ModelNecaSketchup
Last edited by Spack on Fri Mar 27, 2015 4:47 pm, edited 3 times in total.

2 Comments Viewed 3139404 times

Predator bio mask 1/4 scale modelling

Permanent Linkby Spack on Tue Feb 24, 2015 6:10 pm

I've recently come into possession of a number of NECA 1/4 scale Predator figures, including the "classic" Jungle Hunter from the first movie with the "closed mouth" head. I've wanted to make a bio mask/helmet for it since I got it, and have spent quite some time trying to find a suitable 3D model to base it on. After much searching around and a number of false starts with low poly models I finally stumbled across a "pepakura" file designed to be printed on paper and cut out to make a full size helmet. Converting to a useable format for 3D modelling took a little time, but I was finally able to get it into Sketchup and start tinkering with it to try and make it suitable for printing in 3D.

I already had a rough mesh of the head from the closed mouth Predator that I'd created using 123d Catch on my phone, and sized in Sketchup to be as close to the physical version as possible. Using this I was then able to scale the pepakura mesh to the head, leaving a little...

[ Continued ]
Attachments
mask internal details.png
predator3lge.jpg
pdo mask with shell smoothed inner details.png
pdo mask with shell smoothed.png
pdo mask with shell.png
low poly from pdo.png

Tags: PredatorBio Mask3D ModelNecaSketchup
Last edited by Spack on Fri Mar 27, 2015 4:47 pm, edited 7 times in total.

0 Comments Viewed 3716098 times

Minecraft Sword

Permanent Linkby Spack on Sat Feb 01, 2014 1:57 pm

So my son wanted a Minecraft sword to run around the house with. I've managed to stay well away from Minecraft, but decided to make him one out of cardboard instead of dropping a large amount of cash on a foam one. It was pretty easy to find a large picture of a sword on Google, and then print it out on a couple of sheets of A4 paper. These were then glued to some scrap cardboard from a box using spray mount.

IMG_1179.JPG
IMG_1180.JPG


After allowing to dry this was then cut out using a steel rule and a scalpel. As it's a little thin a second one was made, and then these glued back to back with the edges coloured using felt pen. Finally cellotape was wrapped around it to help protect it against all the bumps it will get while it's swung around, and to stop the two halves coming apart.

IMG_1182.JPG
...

[ Continued ]
Attachments
IMG_1188.JPG
IMG_1184.JPG
IMG_1183.JPG

Tags: MinecraftPapercraft
1 Comment Viewed 860790 times

1/72 BF 109 Propeller Repair

Permanent Linkby Spack on Sat Apr 13, 2013 2:00 pm

Some time ago my son and I built a Revell 1/72 scale Messerschmitt Bf 109 G-10 model kit. The canopy has not been glued on as I wanted him to paint it first, but it ended up sitting on a shelf for months and at some point one propeller blade has broken off and been lost. This month my son wants to paint it, so it's time to repair it as it'll look odd with only two blades instead of three. I was first going to try to use some plasticard to repair it, but that was a non-starter as the blade is very thin and has a twist to it that would be extremely to replicate in this way.

Luckily I have some Oyamru "instant mold" that I bought a few years ago, and has previously been used in other projects. This stuff is great, as it's a thermal setting plastic - when it's put in boiling water for about a minute it goes very soft, and then hardens as it cools. Once cool it holds a perfect impression of the item it has been molded around. I couldn't find any "green stuff" putty kicking...

[ Continued ]
Attachments
IMG_0776.jpg
IMG_0775.jpg
IMG_0774.jpg
IMG_0773.jpg
IMG_0772.jpg
IMG_0770.jpg

Tags: OyamaruInstant Mold1/72Casting
2 Comments Viewed 439766 times

Painting the Tiger I - 1/87 scale card model

Permanent Linkby Spack on Thu Mar 21, 2013 7:59 pm

For the AoS painting competition I have taken a model I had almost finished building for my son's train set, and attempted to make it look a little more model-like. The original JPG template can be downloaded here: http://sega.jp/pc/soft/advd2001/img/pm3_01_.jpg (instructions here: http://sega.jp/pc/soft/advd2001/sp_pmt1.html ). This is a 1/144 scale model, but I needed 1/87 to match the scale of the Panzerzug train being built so scaled it up in Photoshop and rearranged the components to fit on an A4 sheet of card.

Here's the model built, with the original inkjet colouring. I've left the tracks off to make them easier to paint.

IMG_0689.jpg
IMG_0686.jpg
...

[ Continued ]
Attachments
competition_tiger.jpg
IMG_0695.jpg

Tags: PanzerTigerCard Model
Last edited by Spack on Thu Mar 21, 2013 8:01 pm, edited 1 time in total.

2 Comments Viewed 715463 times
User avatar
Spack
I R Ginger
Field Marshall
 
Posts: 6815
Joined: Sat Feb 12, 2005 12:00 am
Location: Birmingham, UK
About Me: I've been interested in Warhammer 40k since 1988 when I bought my first Space Marines. Over the years have also owned and played Space Hulk, Adeptus Titanicus, Space Marine/Epic 40k, Blood Bowl, WHFRP (1st ed), Judge Dredd, Aeronautica Imperialis, and a few other TT/RP games.

Currently working as a software developer in the automotive industry using VB, C/C++, ASP, PHP, HTML/CSS, JQuery/Javascript, SQL, and as an admin managing networks running Windows 2008/2012/2016 and SQL Server 2008/2012/2014/2017.

Develop on personal sites with PHP, including modding phpBB3, Gallery2, and admin MySQL, Linux, CVS, and more.

[b]Personal/hobby websites[/b]
These are websites that I curently run.
[url=http://www.ageofstrife.com]Age of Strife[/url]
[url=http://www.ab40k.org]AB40k.org[/url]
Blog: View Blog (29)
Archives
- March 2015
Predator P1 Bio 1/4 scale 3D modelling continued
   Thu Mar 26, 2015 9:01 pm

+ February 2015
+ April 2013
+ March 2013
+ December 2012
+ November 2012
+ September 2012
+ August 2012
+ June 2012
+ May 2012
+ April 2011
Search Blogs