Howdy folks.

I have finally got the 2 ebay rescued Rhinos and rescued Landraider painted up. I've also painted up my home made Razor turret with weapons and my home made Whirlwind turret. Let me know what you think.




Yeah the two handles are differnt sizes. I botched up >.< May goo back and sort that later.





For now, the Whirlwind turret will simply share an existing Rhino. But when I have...

[ Continued ]

Finished painting my Pandora models, including Avatar of Famine (with Teenage Candy) and old sculpt of Pandora.
Planning to use old sculpt to show her having reached the 1st manifestation criteria.



Teenage Candy needs a little bit more work finishing off her base and maybe darken her hair - bit bright yellow at the moment.

Got the basic hull of the Kommandowagen completed tonight. Still needs railings, buffers, and hatches, but is otherwise pretty much done.



I also did a bit more work on the Artillery/Flak railcar, adding the connecting corridor at the Flak platform end (there isn't one at the turret end, as the next railcar would be the tank carrying well wagon) and armour plates for the buffers.




And finally some pics of the new railcars on track and next to the loco and Panzertriebwagen.

Initial modelling details can be found in blog/Spack/predator_bio_mask_14_scale_modelling_b-176.html

I finally got around to working on the 3D model again, and have reached a point where I'm happy with the details and have prepared the model for printing. As well as finishing the interior venting details, the hose connector on the left temple was replaced with something closer to that used on the NECA Big Red figure (the Big Red bio is almost identical to the original P1 helmet, the only differences being the two half spheres on the forehead and the colour), and a small hose connector detail was added to the left cheek (this detail is missing from the NECA bios).





[ Continued ]

The heads got here even with the calamities of snow, I knocked together some mock ups, these won't be the final torso but gives you an idea of scale and detail. Apologies for the poor pictures, the Iphone is no comparison to an DSLR but that's off limits

The 'beak' holes are for tubing that will be added later. The third picture is the covered variant. For the purpose of explantion, the first two pictures are using the maxmini combat torso and legs, the third is a cadian torso with FW renegade arms.



...

[ Continued ]