Login

Username:


Password:


Remember me



Forgot Password?




 Merchandise




3d printing - damn I'm hooked

Want to show off your painted figures? Got a cool conversion? Need some ideas?

Re: 3d printing - damn I'm hooked

Postby Spack » Tue Aug 23, 2022 9:39 pm

Had a run of printing Primarchs, taking large scale statues and scaling them down to 40k scale, and combining all the parts so they were printed as a single figure and separate base.

Still got a few more to do, but got sidetracked printing bigger things.
Attachments
20220709_084516.jpg
20220712_063046.jpg
User avatar
Spack
I R Ginger
Field Marshall
 
Posts: 6807
Joined: Sat Feb 12, 2005 12:00 am
Location: Birmingham, UK
Medals: 2
Bronze (1) Painting Entrant (1)
Blog: View Blog (29)

Re: 3d printing - damn I'm hooked

Postby Spack » Tue Aug 23, 2022 9:44 pm

Decided to see how big I could go printing a single piece model, so scaled this forest dragon to just fit in the print volume. It was also a test of Elegoo abs like smoky gray resin, it has some flex to it so less risk of snapping small details.
Attachments
20220724_081928.jpg
User avatar
Spack
I R Ginger
Field Marshall
 
Posts: 6807
Joined: Sat Feb 12, 2005 12:00 am
Location: Birmingham, UK
Medals: 2
Bronze (1) Painting Entrant (1)
Blog: View Blog (29)

Re: 3d printing - damn I'm hooked

Postby Spack » Tue Aug 23, 2022 9:56 pm

And so started a run of printing bigger and bigger models.

The first Skarbrand inspired thirster was printed in two plates, one for the body and one for the pair of wings.

The other two were one plate each, with the wings either side of the body, scaled down to 85%.
Attachments
20220801_070436.jpg
20220804_212115.jpg
20220807_165751.jpg
20220808_193656.jpg
User avatar
Spack
I R Ginger
Field Marshall
 
Posts: 6807
Joined: Sat Feb 12, 2005 12:00 am
Location: Birmingham, UK
Medals: 2
Bronze (1) Painting Entrant (1)
Blog: View Blog (29)

Re: 3d printing - damn I'm hooked

Postby Spack » Tue Aug 23, 2022 10:04 pm

And most recently decided to try a bit bigger again. This dragon needed 16 hours for the body and tail, another 16 hours for the 4 wing pieces together, and then another 6 hours for the base and a replacement tail end (I didn't support the tail properly and one spike didn't get printed).

Was my first try at using resin with a UV torch to bond pieces together and fill gaps. Used tiny amounts of super glue to hold the parts in place, then used a bradal to add drops of resin into the joints and then a few seconds of UV light to cure it. The joints are really strong!
Attachments
20220820_071907.jpg
20220820_075215.jpg
20220821_023617.jpg
20220822_221524.jpg
User avatar
Spack
I R Ginger
Field Marshall
 
Posts: 6807
Joined: Sat Feb 12, 2005 12:00 am
Location: Birmingham, UK
Medals: 2
Bronze (1) Painting Entrant (1)
Blog: View Blog (29)

Re: 3d printing - damn I'm hooked

Postby RotweillerofJustice » Sun Sep 11, 2022 11:31 pm

They look great. I think I need to start saving for one.
RotweillerofJustice
Shas'ui
Shas'ui
 
Posts: 479
Joined: Fri Dec 28, 2007 12:00 am
Location: Bournemouth
Medals: 6
Silver (1) Painting Entrant (5)

Re: 3d printing - damn I'm hooked

Postby Spack » Tue Oct 04, 2022 11:57 pm

I've neglected to post for a while again. I've printed about 3500pts of Khorne Daemons since my last photo, and a few other bits and pieces.

This is all of the Khorne models I printed in red resin - Skarbrand, two Bloodthirsters, Rendmaster Herald on Blood Throne, Skull Cannon, a few Bloodmasters, Skulltaker, Skull Master on Juggernaut, 10x Blood Crushers, 24x Bloodletters. I've also now added 9 Flesh Hounds and Karanak in grey resin but not yet taken a photo. Need to get a better one in daylight.

20220924_205237.jpg


Tried out transparent resin too for replacement Eldar skimmer and Valkyrie canopies, which worked pretty well.
User avatar
Spack
I R Ginger
Field Marshall
 
Posts: 6807
Joined: Sat Feb 12, 2005 12:00 am
Location: Birmingham, UK
Medals: 2
Bronze (1) Painting Entrant (1)
Blog: View Blog (29)

Re: 3d printing - damn I'm hooked

Postby _stu_ » Fri Oct 07, 2022 12:48 am

looking grand bud :) I'm picking up my 3rd resin printer tomorrow, kicking off another couple of scenery projects at the weekend. That red resin looks ace - might need to try it out
Facebook @ Lividfish Paints
User avatar
_stu_
Darth Addictus
Veteran Sergeant
 
Posts: 383
Joined: Sat Feb 27, 2010 5:11 pm
Location: Seaham, Durham
Medals: 16
Anvil's Hammer - 2nd Place (1) Gold Wreath (1) Gold (3) Silver (4) Painting Entrant (7)

Previous



Return to Painting & Modelling - General




 Social Links