Anyone what to purchase this (see photos) before I list it on Ebay

The War Hydra model is partially assembled, it has been cleaned and filed, mould lines and extraneous flash filed and removed. Each of the five necks and corresponding body joins have been painstakingly drilled and a pin added. The connections have been dry fitted, tested and trimmed where necessary to achieve as good as a fit as possible (see attached photos). Each of the necks and body mounts are matched – I’ve marked the necks and body mounts they might easily be identified which head goes with which body mount.

Please note that the photos show the War Hydra assembled dry fitted (with the exception of one neck / head) no glue has been added and it should be clear from the photos that the pins by themselves are able to support the neck and heads on there own. The addition of superglue will further reduce the gaps inbetween the joins and a small amount of greenstuff filler can be used to completely mask any seams if required.

The 2 Beastmasters are relatively untouched and also sold as seen.