Login

Username:


Password:


Remember me



Forgot Password?




 Merchandise




Dangerous Terrain (tutorial)

Dangerous Terrain (tutorial)

Postby timewizard » Tue Apr 20, 2010 2:42 am

I decided that my game table needed some areas of dangerous terrain. Just a couple of small pieces to start with to block off some movement points. I started with some thin MDF board and cut out a couple of random shapes. The rough measurements were about 5 1/2" X 2". I cut the shapes out with a jigsaw and then ground the edges down with a belt sander. Here's how they started.
Image

Being dangerous terrain I wanted to use some old barrels to kind of simulate a toxic spill or a toxic pool. I also wanted to give the impression of some depth, so a couple of GW barrels and a razor saw later...
Image

I used spackle (polyfilla over the pond) to build up the 'banks' of the toxic pools. I didnt want the MDF to warp on me so I first primed the bases with flat black. Then I added the spackle.
Image

I wanted the illusion of both depth and currents of toxic goo, so I started with a couple of thin coats of Vallejo dark green, then GW goblin green and finally some GW scorpion green. I painted the sides of the pool my brown landscape color and went to work on the barrels.
Image

The barrels were primed white, then got 4 or 5 coats of a brown wash called "Didi's Magic Brown" that I picked up from The War Store over here. After that, they got a light drybrush of GW blazing orange and got super glued down to the base. They were finally starting to look like something.
Image

To finish them off, I glued a couple of skulls from the bitz box down, then I added a couple of drops of GW bad moon yellow to a small cup of Vallejo Water Effects. Gave it a very slight stir with a toothpick to 'swirl' the color but not mix it completely. Then it got poured into the base and when it dried I put some dead looking static grass in a few spots.
Image

I thought they came out pretty good, so I made a couple more in a little larger size. The second set are roughly 7" X 2 3/4". Gives me a few new and interesting terrain features for the board.
Image

I'm just trying to figure out if I want to add more static grass or some brown flock to the 'plain' brown areas of the banks. All in all this wasn't a bad project to undertake. All of the materials were leftovers from other projects and stuff from the bitz box. It only took about 3 days to make them, and most of that was drying time. Hope you find this interesting and maybe even helpful! C&C welcome as always!
Cheers! Time Wizard
"I have found again and again that in encounter actions, the day goes to the side that is the first to plaster its opponent with fire." - Erwin Rommel
User avatar
timewizard
Master of Chronomancy
Field Commander
 
Posts: 5896
Joined: Fri Sep 21, 2007 12:00 am
Location: (TWAT Colonial Outpost) in the eastern USA
Medals: 11
Gold Wreath (1) Gold (1) Silver Wreath (1) Bronze (2) Painting Entrant (6)
Blog: View Blog (2)

Re: Dangerous Terrain (tutorial)

Postby Spack » Tue Apr 20, 2010 7:52 am

Very nice. The liquid look is very effective.
User avatar
Spack
I R Ginger
Field Marshall
 
Posts: 6775
Joined: Sat Feb 12, 2005 12:00 am
Location: Birmingham, UK
Medals: 2
Bronze (1) Painting Entrant (1)
Blog: View Blog (29)

Re: Dangerous Terrain (tutorial)

Postby Angelwing » Tue Apr 20, 2010 8:26 am

I like these. I reckon some detailing such a s sand for the non grassy bits will help. It looks a bit too smooth at the moment.
User avatar
Angelwing
Zoanthrope
Zoanthrope
 
Posts: 2311
Joined: Thu Sep 20, 2007 12:00 am
Location: Bridgwater, Somerset
Medals: 17
Gold (5) Silver (1) Painting Entrant (11)

Re: Dangerous Terrain (tutorial)

Postby mattjgilbert » Tue Apr 20, 2010 9:16 am

I agree. The middle looks good but the edges would benefit from some texture.
User avatar
mattjgilbert
BladeDancer
Daemon Prince
 
Posts: 5847
Joined: Wed Sep 19, 2007 12:00 am
Location: Worthing, UK

Re: Dangerous Terrain (tutorial)

Postby ruffian4 » Tue Apr 20, 2010 12:01 pm

Nasty nasty goo goo (which is praise indeed, of course)!

If you want to add static grass to the edges, how about blackening it, as if it is really enpooped by the waste.
Perhaps a couple of sticks as dead trees?
killmaimburn wrote:If this is a masked ball, then the other bits of him are off spiking the teachers punch.


DEATH WATCH DEATH RATTLE DEATHS DOOR AINT I DIED ENOUGH BEFORE?
User avatar
ruffian4
4th dan imbecile
Sorceror
 
Posts: 3065
Joined: Sun Dec 09, 2007 12:00 am
Location: Twat hq.




Return to Tutorials




 Social Links