ruffian4 wrote: Have you got 45" angle molds, or is it ok to cut?
The hydrocal is really tough to cut. For the corners I had originally carried the stonework over the corner. However, for the next mold I modeled some corner pieces that will allow me to configure the walls however I want and will be able to finish off the corners. Molding and casting 45° angles would be a challenge, I'll give it some thought and see what I can come up with.
ruffian4 wrote:Was serious about the animals, btw, lolly stick barns, scouring pad hedges, antique farmyard machinery and all.
I thought as much!
But these are just for the wargame, the animals would have probably run off by now!
But a stick barn, or maybe a stick outbuilding? Hmmm. Food for thought! Thanks mate!
ruffian4 wrote:That's a point, why not combine your two threads and make some burning buildings???
A smashed up hollow shell, full of large scale flames?
I'm actually working on "two step" buildings where you can lift off a part of the wall leaving a ruin in it's place. It'll be a bi difficult, but it's on the drawing board for the future!